How to Clean the Residual Oil in the POD?

As a vaper, you may have noticed that over time, your POD accumulates residual oil. This not only affects the flavor and performance of your vaping device but can also lead to issues such as clogging and reduced vapor production. Cleaning the residual oil in the POD is an essential maintenance task that can help extend the lifespan of your device and ensure a consistently enjoyable vaping experience. In this blog, we’ll guide you through the step – by – step process of effectively cleaning the residual oil in your POD.

Before you start the cleaning process, it’s important to gather the necessary tools and materials. You’ll need a clean, lint – free cloth or paper towel, a small brush (such as a toothbrush or a dedicated vape cleaning brush), rubbing alcohol (preferably 90% or higher concentration), and a small container for holding the cleaning solution. Additionally, make sure you’re working in a well – ventilated area to avoid inhaling any fumes.

1. Disassemble the POD

The first step is to carefully disassemble the POD. This may vary depending on the specific model of your vaping device. Some PODs can be easily separated into components, such as the tank, the coil, and the mouthpiece. Refer to your device’s user manual for detailed instructions on how to disassemble it properly. Be gentle during this process to avoid damaging any parts.

2. Remove Excess Residual Oil

Use the lint – free cloth or paper towel to wipe away as much of the visible residual oil as possible from the inside and outside of the POD components. Pay special attention to areas where oil tends to accumulate, such as the bottom of the tank, the coil, and the connection points. You can also gently tap the components to dislodge any loose oil.

3. Prepare the Cleaning Solution

Pour a small amount of rubbing alcohol into the container. If your POD has stubborn stains or a large amount of residual oil, you can mix a few drops of mild dish soap with the rubbing alcohol. However, be cautious when using dish soap, as too much can leave a soapy residue that may affect the flavor of your vape.

4. Soak the Components

Place the disassembled POD components into the container with the cleaning solution. Make sure all the parts are fully submerged. Let them soak for about 10 – 15 minutes. This will help dissolve the stubborn residual oil and kill any bacteria or contaminants that may have accumulated.

DE030 60000 Puffs Disposable Vape with LED Display Screen and Adjustable Airflow Rechargeable ATVS Vape

5. Scrub the Components

After soaking, use the small brush to gently scrub the components. Pay close attention to hard – to – reach areas, such as the crevices around the coil and the inside of the mouthpiece. Use a circular motion to loosen and remove any remaining residue. Be careful not to apply too much pressure, as this can damage the delicate parts of the POD.

6. Rinse Thoroughly

Once you’ve scrubbed the components, remove them from the cleaning solution and rinse them thoroughly with warm water. Make sure to remove all traces of the rubbing alcohol and any soap residue. You can use a running tap or a container of clean water for rinsing.

7. Dry the Components

After rinsing, use a clean, dry lint – free cloth or paper towel to pat the components dry. Make sure all the parts are completely dry before reassembling the POD. Any moisture left inside the POD can cause issues such as short – circuits or affect the performance of the device.

8. Special Considerations for Different POD Types

Closed – System PODs

Closed – system PODs are designed to be more user – friendly and less customizable. In most cases, you can’t fully disassemble the POD. For these types of PODs, you can use a cotton swab dipped in rubbing alcohol to clean the exterior and the mouthpiece. To clean the inside, you can try blowing air through the POD to dislodge any loose residual oil. However, be aware that closed – system PODs are often disposable or have a limited lifespan, and excessive cleaning may damage the seal or the internal components.

Refillable PODs

Refillable PODs offer more flexibility in terms of cleaning. Since you can usually remove the coil and other components, you can follow the full cleaning process described above. When cleaning the coil, be extra careful not to damage the wick. You can also consider replacing the coil regularly, especially if it has been heavily used or if you notice a significant decline in flavor and vapor production.

Maintenance Tips

Regular cleaning is essential to keep your POD in good condition. Aim to clean your POD at least once a week, or more frequently if you use it heavily. Additionally, make sure to store your POD in a cool, dry place when not in use to prevent the accumulation of dust and moisture. If you notice any unusual smells, flavors, or performance issues with your POD, it may be a sign that it needs cleaning or that there is a more serious problem with the device.

In conclusion, cleaning the residual oil in the POD is a relatively simple but important task for vapers. By following these steps and maintenance tips, you can ensure that your vaping device performs at its best, provides a great flavor, and lasts longer. Remember, a clean POD is the key to a satisfying and enjoyable vaping experience.

How to Clean the Residual Oil in the POD?

1. Disassemble the POD​

2. Remove Excess Residual Oil​

3. Prepare the Cleaning Solution​

4. Soak the Components​

5. Scrub the Components​

6. Rinse Thoroughly​

7. Dry the Components​

8. Special Considerations for Different POD Types​

Related Blog

Can I Inject New E-liquid Directly into the POD Without Cleaning it?

How long do you refill your cartridge?

Can the Color of a Disposable Vape Be Customized?

Are disposable vape popular in Washington, D.C.?

Exploring the Pleasure of Vaping

How to Clean a Clogged Vape?